1. Walk the plan with you
We meet on site or review your drawings, talk through how you will use the space, and note the panel, the meter, and any city requirements that will shape the job.
Paulsen Power is the project electrician for basement finishes, remodels, panel and service upgrades, EV chargers, lighting, and standby generators. We plan the scope, pull the permit, and walk the inspection with you.
If you are planning a basement finish, a kitchen or bath remodel, a 200 amp service, or an EV charger, you need an electrical contractor who will treat that work as a project, not a guess. Paulsen Power LLC is based in West Jordan, Utah, and we build a clear plan before anyone opens a wall.
Jeremy Paulsen is a licensed electrical contractor. On your project we start with what you want the space to do, check the load on the existing panel, and map circuits, lighting, and any 240 volt equipment so the finished work passes inspection and still has room to grow. New construction is not our focus. Planned electrical on homes that are already standing is.
We meet on site or review your drawings, talk through how you will use the space, and note the panel, the meter, and any city requirements that will shape the job.
You get a written scope: circuits, fixtures, panel work if it is needed, a realistic window for the visit, and a budget that matches the plan. If a service upgrade has to come first, we say so up front.
We pull the electrical permit with your city, coordinate a Rocky Mountain Power disconnect when a service change needs one, complete the install, and meet the inspector.
Call (385) 403-1403 or request an estimate below to start the plan.
Many Salt Lake Valley homes still run on a 100 or 125 amp service that cannot carry a basement finish, a new HVAC unit, and a car charger at the same time. We plan 150 and 200 amp panel and meter upgrades, including overhead and underground services. Learn about panel upgrades
Lighting, can lights, outlets, smoke and CO alarms, bathroom GFCIs, and dedicated circuits for a wet bar, gym, or shop — laid out to match your finish drawings and the inspection. Basement finish electrical
A Level 2 charger is a planned 240 volt circuit, not a leftover breaker slot. We start with a load calculation, confirm the panel can take it, and install a 30, 50, or 100 amp circuit where you actually park. EV charger installation
We also handle electrical for kitchen and bath remodels and additions, lighting upgrades and can lights, hot tub circuits, heat tape (including standalone heat-tape jobs in the mountains and along the Wasatch Front), backup power (a portable-generator inlet with a panel interlock, or a standby generator with a transfer switch), and other electrical project work in the home. When we are already at the panel for an upgrade, a generator, a hot tub, or an EV charger, Jeremy Paulsen typically recommends a whole-home surge protector at the panel — an optional upgrade, not a Utah code requirement. If it is part of a planned project, we will tell you how it fits the panel and the permit. See the full services list.
Paulsen Power is a service-area contractor. We do not run a public storefront. We serve homes within about 50 miles of West Jordan, including:
West Jordan, Salt Lake City, Sandy, South Jordan, Midvale, West Valley City, Murray, Kearns, Riverton, Herriman, Draper, Taylorsville, Millcreek, Holladay, Cottonwood Heights, South Salt Lake, Magna, Bluffdale, Lehi, Park City, North Salt Lake, and Bountiful, plus other cities in Salt Lake, Utah, Davis, Tooele, Summit, and Wasatch counties that fall inside that range.
Learn more on the About page.
No. We are based in West Jordan and serve homes within about 50 miles, including Salt Lake City, Sandy, South Jordan, Midvale, West Valley City, and the rest of the list above.
Paulsen Power LLC is an electrical contractor. We plan and install the electrical on basement finishes, remodels, additions, and upgrades, and we coordinate with your builder or finish crew. We do not advertise tile, trim, or structural work on this site.
Yes. Paulsen Power takes service calls, troubleshooting, and repairs, as well as planned project work. Call (385) 403-1403, Monday–Friday, 8:00 AM–5:00 PM, and tell us what is going on.
Call (385) 403-1403 or use the estimate form. Most project quotes need a site visit or a review of your drawings so the load, the panel, and the permit are accurate.
Whole-home surge protection is optional, and we recommend it.
Yes, the safe and legal way: a dedicated outdoor inlet and a panel interlock kit, so the generator cannot backfeed the utility. Never plug a generator into a dryer or wall outlet. If you want automatic backup, ask about a standby generator with a transfer switch.
Yes. Paulsen Power LLC installs a dedicated 240 volt circuit with a GFCI disconnect, after a panel-capacity check and a permit. A tight 100 amp service often needs an upgrade first.
Ready to plan the electrical on your project? Call (385) 403-1403 or request an estimate. Monday–Friday, 8:00 AM–5:00 PM.